09.09.2016
The customer called us complaining that every time he would try turn on the oven, it would restart every few seconds. After our tech checked the oven and looked through the manual, he decided to try replacing the Logic PCB Assembly Version 3.0 SA260 и Display Assembly & Header Version 2.0 30Z1299, but it did not help, so he also replaced the Relay PCB Assembly 11K0004, after which the oven stopped turning on at all. The tech put all of the old parts back in, and, surprisingly, the oven started working and would not restart after a few seconds, which was extremely weird so the tech decided to run a couple of cycles to see how the machine would behave. He tried turning the oven on and off a few times, and it stopped working again, so he ended up installing just the new Relay PCB Assembly 11K0004 after which the oven started working perfectly. Also, the oven was intended for 240VAC, but it was only getting 208VAC which, as the customer explained, was caused by replacement of the components of the oven for the 208VAC about 6 years ago. In addition, the tech changed the 12.5VAC transformer to 208VAC since this transformed has been working on 240VA for the past 6 years. Finally the Subway customers were able to get their perfectly roasted subs.
09.09.2016
Another customer's Heatcraft let090bsw unit with a large freezer stopped cooling enough. During the checkup, our technician noticed that the evaporator coil was completely covered with ice which is an indicator for defrost system problem. The tech checked the defrost timer on the roof - it was working perfectly fine. Then our technician took apart the lower unit in the freezer and saw burned down wires of the defrost thermostat,so he did a bypass for the power wires and the heating element started getting the power. Next, the tech cleaned the evaporator coil from the ice and installed a new defrost thermostat, after what the unit started cooling again.
28.08.2016
A customer's AC was not cooking because the unit would get overheated due to the burned down fan motor. Replacement of the fan motor fixed the issue.
28.08.2016
During the service call our technician was able to determine that there was a blockage in the drain line and that the condenser coil was dirty. The tech cleaned and defroster the drain line, which fixed the issues with the GE Profile pfcs1nfzss refrigerator
28.08.2016
Another customer contacted us complaining about his dryer being too hot when running. First our tech checked the dryer in the Air Only cycle - the dryer would still be warm, which meant that there was wither a problem with the control board WP8546219 or there was a short circuit in the heating element. The tech turned on the dryer in the Air Only cycle again and connected the multimeter to the heating element, it was determined that since the control board was still sending power to the heating element even in the Air Only cycle, the control board WP8546219 had to be replaced. After the technician replaced the control board WP8546219, the dryer was not overheating anymore, but just to double check the diagnosis the tech also checked the relay of the old control board WP8546219, and it was showing continuity all the time which meant that it was shorted inside and therefore was defective.
We offer appliance repair at competitive prices in San Francisco Bay Area, including the following counties:
Alameda County
Contra Costa Country
Santa Clara County
San Mateo County
San Francisco County
Sacramento County
Most Common Reasons Why Your Oven Might Be Making Noises.
Not every time that our appliance makes noises we need to worry.
And not every surprising noise is a big deal. For example, if you have a gas oven and it makes a hissing sound, it is just the gas releasing that will be ignited.
The noises of the oven can be connected with different reasons.
Its important to understand the reason for the noise.
Convection ovens often make noises, and in most cases, this is generally due to the way their impeller fans work.
When the impeller fan is the problem, the good news is that it is generally not a problem with the fan – it just needs to be cleaned.
If you do not have a convection oven but are seeing the same symptoms as described above, it could be an issue with the cooling fan. If you hear screeching, grinding, or squeaking noise – but only when you shut off the oven – it could be due to a dirty cooling fan.
Purchasing an appliance is considered a costly investment and we try to do our best to maintain it right and keep it in working condition as long as possible.
We try to give some tips for helping our customers fix minor problems themselves and properly maintain the appliance. Keep It Clean!
Accumulation of debris in the lint trap can cause the machine to overheat, but that lint can catch fire, so you need to be very careful. Clean the lint trap after every cycle and make sure you check the pipes in a while and vacuum them if necessary. Checki For Damaged Equipment
Run your hand around the edges of the door when the dryer is working. If you feel a lot of hot air coming out, you may be dealing with a damaged door gasket, which prevents the door from closing properly. Don’t Overload It
Thinking that the last pair of jeans you stick in won’t have any effect on your dryer? Think again. Overloading your dryer can prevent the clothes from drying properly and can also damage the rotating mechanism. When in doubt, you should do two drying cycles and split your clothes in two.
Sunny Appliance Repair provides professional appliance and refrigerator repair in Bay Area( San Francisco, Fremont, Palo Alto, Sacramento, etc.). We know that appliances breaking down is never convenient, which is why we provide same day repair services to ensure that your appliances are back up and running in no time.Our licensed and certified professionals are available 7 days a week. When you need to repair your refrigerator, get in touch with us by giving us a call, or booking an appointment online! We service all major brands of refrigerators and freezers like Viking, Subzero, Maytag, Samsung, GE and all others. As a Sub Zero refrigerator repair specialist, our technicians carry an extensive range of parts and would expect to fix your Built-in Refrigerator, French Door Or Side-by-Side fridge on the first visit. All our appliance repairs are carried out by experienced technicians using high-quality appliance parts from trusted suppliers. Most parts are reasonably priced and if it does need an expensive part you are not obliged to have the repair carried out and at least you will know it is time for a new one. Sometimes, all your fridge needs is a thorough cleaning. Other times, the issue may be more complex where we need to look into the motor or compressor. On top of that, we make sure you get excellent customer service by encouraging our representatives to stay current on best practices. We are carefully prepared, making sure that health and well-being of all individuals working here are protected in the best possible way. All our technicians have been provided with the necessary equipment to fulfill work duties. During this hard time of pandemic our technicians always wear masks, gloves and glasses during their visits.