A customer called us because his washer was leaking in spin cycle. Our technician disassembled the washer and started checking leaking places. It turned out that the drain pump was leaking. It was a struggle to remove the old drain pump since the axle was completely covered with rust. After the tech received the new drain pump WP3363394, he tried replacing it but it would not fit on the axle because of the rust. First the tech had to clean up the rust with a broaching file, paint that area to prevent rust in the future, and only after that the drain pump WP3363394 fit the Whirlpool LSC8244EQ0 washer perfectly. The repair on the Whirlpool LSC8244EQ0 washer was complete, and the customer was happy to be able to use it again.
We offer appliance repair at competitive prices in San Francisco Bay Area, including the following counties:
Contra Costa Country
Santa Clara County
San Mateo County
San Francisco County
Double oven had an issue with lower bake element. It wouldn’t heat up to a certain temperature and newer goes above 200 degrees. When our technician checked the voltage coming to an element it showed 120 instead of necessary 220-240, which leaded to a control board relay board problem. We had to order a new power board and replace it in order to made it back to normal.
A couple of weeks before the customer detected the problem with her top-loading GE washer, there were repairs done on the cold water pipe-system. Dirt and mud from the pipes clogged up the hose filter, preventing normal water flow. That’s why the washer was filling so slowly. Our tech cleaned the hoses and the washer started filling water perfectly.
The Samsung RF287AERS fridge was acting out, making noises and not keeping the food cold enough. During the diagnostic, our tech noticed that the defrost sensor was showing around 20MOhms when frozen. It was clear that the defrost sensor was defective and had to be replaced.