GE Monogram ZIS420B refrigerator repair - not cooling enough. San Jose, CA
09.09.2016
A customer contacted us because his GE Monogram ZIS420B refrigerator was not cooling enough. The doors of the refrigerator were hot and the temperatures inside the fridge and the freezer were 40F and 20F respectively. Our tech realized right away that the problem was with the condenser coil, and this suggestion was correct since the condenser coil was was covered in dust. While our tech was cleaning the condenser coil, the compressor started running, but the condenser fan motor would not start even the cleaning was done. After our tech replaced the condenser fan motor WR60X10209, the refrigerator started cooling down to the right temperature.
and choose your discount
We offer appliance repair at competitive prices in San Francisco Bay Area, including the following counties:
Alameda County
- Oakland
- Alameda
- Albany
- Berkeley
- Castro Valley
- Dublin
- Emeryville
- Fremont
- Hayward
- Livermore
- Newark
- Piedmont
- Pleasanton
- San Leandro
- Union City
- Surrounding area
Contra Costa Country
- Clayton
- Concord
- Danville
- El Cerrito
- Hercules
- Lafayette
- Martinez
- Moraga
- Orinda
- Pittsburgh
- Pleasant Hill
- Richmond
- San Pablo
- Walnut Creek
- San Ramon
- Surrounding area
Santa Clara County
- Campbell
- Cupertino
- Gilroy
- Los Altos
- Los Altos Hills
- Los Gatos
- Milpitas
- Monte Sereno
- Morgan Hill
- Mountain View
- Palo Alto
- Santa Clara
- San Jose
- Saratoga
- Sunnyvale
- Surrounding area
San Mateo County
- Atherton
- Belmont
- Brisbane
- Burlingame
- Daly City
- East Palo Alto
- Foster City
- Hillsborough
- Menlo Park
- Millbrae
- Redwood City
- San Bruno
- San Carlos
- San Mateo
- Woodside
- Surrounding area
San Francisco County
- San Francisco
- South San Francisco
This customer’s Nu-Vu UB-5/10 Bread Oven stopped working. At first glance, everything seemed to be working fine, but with a more thorough check the tech noticed that the control board was not getting 208V power. He had to pull up the the whole power supply diagram before doing any further work. Once he was familiar with that, he started checking the wires and was finally able to find the disconnection and fix it. Most likely, one of the wires was simply defective.
We got a call for commercial order from the Indian Street Cafe. They needed urgent help with their TurboAir fridge that had stopped working properly. During the diagnostic our technician noticed a big chunk of ice that has accumulated on the evaporator coil. Apparently the seal of the fridge was not airtight anymore. Replacing the door gaskets and the defrost sensor fixed the defrosting problem of TurboAir M3R47-2 fridge.
Whenever the customer was trying to get some water from the water dispenser of his GE fridge, there was scary loud humming noise which seemed to be coming from where the water filter is connected. Our tech decided to try replacing the Refrigerator Water Filter Head Assembly Part #: WR17X11894 - and it fixed the problem. With the new water filter assembly the humming noise during water dispensing has stopped.
A customer contacted us because his GE Monogram ZIS420B refrigerator was not cooling enough. The doors of the refrigerator were hot and the temperatures inside the fridge and the freezer were 40F and 20F respectively. Our tech realized right away that the problem was with the condenser coil, and this suggestion was correct since the condenser coil was was covered in dust. While our tech was cleaning the condenser coil, the compressor started running, but the condenser fan motor would not start even the cleaning was done. After our tech replaced the condenser fan motor WR60X10209, the refrigerator started cooling down to the right temperature.
