A customer’s dishwasher was not filling up with water, or, more precisely, it was filling up but extremely slowly. The first thing our technicians check in a situation like this is water pressure by removing the hose from water valve. The water pressure was sufficient for the dishwasher to be able to run properly. Next, our tech removed the water valve and saw that there was a lot of calx on the filter. The water pressure from the tap was pretty weak. The tech decided to check the quality of water by pouring it straight from the water valve into a bucket - the water turned out to be white like milk and had lots of small and large pieces of calx. So, the calx had blocked all of the pipes and that is why the dishwasher was filling up with water so slowly. Our customers had major issues with their water supply. The tech cleaned the water valve of their dishwasher but warned them that it would happen again sooner or later so they had to have a water inspector and a plumber check their water supply.
We offer appliance repair at competitive prices in San Francisco Bay Area, including the following counties:
Contra Costa Country
Santa Clara County
San Mateo County
San Francisco County
Double oven had an issue with lower bake element. It wouldn’t heat up to a certain temperature and newer goes above 200 degrees. When our technician checked the voltage coming to an element it showed 120 instead of necessary 220-240, which leaded to a control board relay board problem. We had to order a new power board and replace it in order to made it back to normal.
A couple of weeks before the customer detected the problem with her top-loading GE washer, there were repairs done on the cold water pipe-system. Dirt and mud from the pipes clogged up the hose filter, preventing normal water flow. That’s why the washer was filling so slowly. Our tech cleaned the hoses and the washer started filling water perfectly.
The Samsung RF287AERS fridge was acting out, making noises and not keeping the food cold enough. During the diagnostic, our tech noticed that the defrost sensor was showing around 20MOhms when frozen. It was clear that the defrost sensor was defective and had to be replaced.